ITGS1800 Used Sandblast – (Sold)
❑ Advance speed: 1m²=3-4min
❑ Maximum workable height: 1800mm (72”)
❑ Minimum workable glass dimension: 100X200mm
❑ Glass thickness range: 2-50mm
❑ Power: 5Kw
❑ Electrical requirements: 220V, 3Ph, 60Hz
❑ Required compressed air: 84-116 PSI (dry and clean air)
❑ Compressed air consumption: 2000 liters/min or 20hp
❑ Automatic sprayer guns: 2pc
❑ Manual sprayer guns: 1pc
❑ Aspirator delivery: 600m³/h
❑ Abrasive material: Aluminum Oxide
❑ Overall dimensions: 4100(L) X1450(W) X2250(H) mm
❑ Machine weight: 1700kg
Screw Type + Air Dryer + 1320 Gallons Air Tank – Sold
Screw Type – Companion Air Dryer + 5 Cu.Meters ( 1320 Gallons ) Air Tank
SKAC-75S Air Compressor 75HP(55KW),
480V, 3ph, 60Hz – 0.8-1.0 MPa, (120-150 psi) – 9M3/min (320 cf/min)
Total Run time: 2525 H 06 M (Almost New)
Loading Time: 757 H 23 M
***Ideal For Autoclave
Used – Bent & Flat Tempering Furnace
For sale- We have a 60″X120″ Bent & Flat tempering Machine. This machine was installed in Sept 2017. The machine can do both flat and bent tempering. Meaning, that if the glass runs in one direction you get flat tempered glass and in the opposite direction you can get bent glass for which you define the radius. It can temper thickness range from1/4″-3/4” glass and heat strengthen 3/16” glass.
Installation by Jordon Glass local technicians.
If any parts are needed, Jordon Glass will also be able to supply.
Used – Complete Cutting Line- (Sold)
Technical Features
Loader
Max. Glass sheet size 3800×2800
Min. Glass sheet size 1800×1200
Number of working stations 4
Glass thickness 2-22mm
Loading circle time L/R1<40sec; L/R1<55sec;
Cutting Machine
Max. Glass sheet size 3800×2800
Glass Thickness 2-22mm
Max. Beam moving speed 160m/min
Max. Beam cutting speed 120m/min
Max. Beam acceleration 1.25m/s2
Max. cutting head speed 120m/min
Max. Cutting head
acceleration 1.25m/s2
Break-out Table
Max. Glass sheet size 4000×3300
Glass thickness 2-22mm
No. of break-out bars 2+1
No. of blowing fan 2
Distance of blowhole <20mm
Used – Horizontal Drill – DZJ13 – (Sold)
The DZJ13can operate as a dual side driller or top-down only as
desired by the operator. When in dual mode, the bottom drill is activated first and rises using
an advanced damping control system that precisely engages the bottom side of the glass.
Bottom-up drilling depth is controlled via an operator adjusted limit switch. Once the bottom
drill has automatically released, the top drill starts and is manually lowered by the operator.
The DZJ13 offers 6 different operating speeds for varying diameters and glass thickness.
The unit comes with stop guides for repetitive drilling. The DZJ13 has a unique water
floatation system for maneuvering thin glass. This system can also be used for preparing the
drill table area and assuring there is no leftover debris that may scratch the glass. With a
table height of only 3’, the DZJ13 is ideal for loading and drilling glass of all shapes and
sizes.
Used – Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac – (Sold)
Used Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Features:
Automatic painting system
Fast, simple and clean. Fully automatic cleaning system
Maximum profitability and increased production but reduced labor costs
The quickest system cleaning and color changing in glass industry today
80% reduction on product wasted compared to manual spraying
Intuitive software and touch screen adaptable to any language.
Different sizes available: 180cm and 260cm width
Exclusive air filter system — no extraction needed allowing the machine to be placed
anywhere in your factory.
Automatic cleaning function.
The latest sensor control technology ensuring precision spraying every time.
No product wastage — the product is recirculate allowing cleaning and refilling in
approximately 3 minutes.
Unpressurised tanks ensuring no size limitation on paint containers — increasing
production per hour.
Resin catalyst and pigment recycled to stop settlement
Used – Tenon 2000 Automatic Insulating Glass Production Line
TE Series Automatic Insulating Glass Production Line model TE 2000 is
manufactured, assembled and inspected according to ISO9001 Quality Control
System. Most electric components are imported from Germany and Japan. The
stainless steel washing machine and the structure of I.G. line is made by
nonferrous special steel to ensure a long working life for the machine. Tenon
provides satisfied after sales service and spare parts in collaboration with IGE
Solutions in North America
Used Laminating Machine
The QX-LM series are professional glass laminating machines for use without an autoclave system. The
QX-LM series can laminate EVA (Ethylene Vinyl Acetate), DuPont™ SENTRYGLAS® (SG), and PVB
(Polyvinyl Butyral).
DJ252 (Restored) Sold
The 9-spindle DJ252 is suitable for processing straight-line glass with thicknesses ranging from 1/8” to 1 ¼”. The machine utilizes 5 wheels for bottom edging and 4 wheels for front and back 45° arris work.
Sold – DJM9L Used Machine
This DJM9L is a well taken care off used glass polisher and miter machine. The machine was produced back in 2014 and it is in fairly good conditions.
Sold – Refurbished DJM9L Polisher – Edger With Miter
This refurbished DJM9L is a fully refurbished glass edger. The machine has new motors, back/front tracks, transmission, chains, lights, control panel and more!The 9-spindle DJM9L is suitable for processing straight-line glass with thicknesses ranging from 3/16” to 7/8”. The machine utilizes 5 wheels for bottom edging and 4 wheels for front and back 45° arris work.
Sold – Sandblast
USED 2016 72″ high Glass Sandblasting Machine. The glass runs from left to right. The unit operates 4 blasting nozzles.
ITGS1800 Used Sandblast – (Sold)
SKU: N/A❑ Advance speed: 1m²=3-4min
❑ Maximum workable height: 1800mm (72”)
❑ Minimum workable glass dimension: 100X200mm
❑ Glass thickness range: 2-50mm
❑ Power: 5Kw
❑ Electrical requirements: 220V, 3Ph, 60Hz
❑ Required compressed air: 84-116 PSI (dry and clean air)
❑ Compressed air consumption: 2000 liters/min or 20hp
❑ Automatic sprayer guns: 2pc
❑ Manual sprayer guns: 1pc
❑ Aspirator delivery: 600m³/h
❑ Abrasive material: Aluminum Oxide
❑ Overall dimensions: 4100(L) X1450(W) X2250(H) mm
❑ Machine weight: 1700kg
Screw Type + Air Dryer + 1320 Gallons Air Tank – Sold
SKU: N/AScrew Type – Companion Air Dryer + 5 Cu.Meters ( 1320 Gallons ) Air Tank
SKAC-75S Air Compressor 75HP(55KW),
480V, 3ph, 60Hz – 0.8-1.0 MPa, (120-150 psi) – 9M3/min (320 cf/min)
Total Run time: 2525 H 06 M (Almost New)
Loading Time: 757 H 23 M
***Ideal For Autoclave
Used – Bent & Flat Tempering Furnace
SKU: N/AFor sale- We have a 60″X120″ Bent & Flat tempering Machine. This machine was installed in Sept 2017. The machine can do both flat and bent tempering. Meaning, that if the glass runs in one direction you get flat tempered glass and in the opposite direction you can get bent glass for which you define the radius. It can temper thickness range from1/4″-3/4” glass and heat strengthen 3/16” glass.
Installation by Jordon Glass local technicians.
If any parts are needed, Jordon Glass will also be able to supply.
Used – Complete Cutting Line- (Sold)
SKU: N/ATechnical Features
Loader
Max. Glass sheet size 3800×2800
Min. Glass sheet size 1800×1200
Number of working stations 4
Glass thickness 2-22mm
Loading circle time L/R1<40sec; L/R1<55sec;
Cutting Machine
Max. Glass sheet size 3800×2800
Glass Thickness 2-22mm
Max. Beam moving speed 160m/min
Max. Beam cutting speed 120m/min
Max. Beam acceleration 1.25m/s2
Max. cutting head speed 120m/min
Max. Cutting head
acceleration 1.25m/s2
Break-out Table
Max. Glass sheet size 4000×3300
Glass thickness 2-22mm
No. of break-out bars 2+1
No. of blowing fan 2
Distance of blowhole <20mm
Used – Horizontal Drill – DZJ13 – (Sold)
SKU: N/AThe DZJ13can operate as a dual side driller or top-down only as
desired by the operator. When in dual mode, the bottom drill is activated first and rises using
an advanced damping control system that precisely engages the bottom side of the glass.
Bottom-up drilling depth is controlled via an operator adjusted limit switch. Once the bottom
drill has automatically released, the top drill starts and is manually lowered by the operator.
The DZJ13 offers 6 different operating speeds for varying diameters and glass thickness.
The unit comes with stop guides for repetitive drilling. The DZJ13 has a unique water
floatation system for maneuvering thin glass. This system can also be used for preparing the
drill table area and assuring there is no leftover debris that may scratch the glass. With a
table height of only 3’, the DZJ13 is ideal for loading and drilling glass of all shapes and
sizes.
Used – Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac – (Sold)
SKU: N/AUsed Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Features:
Automatic painting system
Fast, simple and clean. Fully automatic cleaning system
Maximum profitability and increased production but reduced labor costs
The quickest system cleaning and color changing in glass industry today
80% reduction on product wasted compared to manual spraying
Intuitive software and touch screen adaptable to any language.
Different sizes available: 180cm and 260cm width
Exclusive air filter system — no extraction needed allowing the machine to be placed
anywhere in your factory.
Automatic cleaning function.
The latest sensor control technology ensuring precision spraying every time.
No product wastage — the product is recirculate allowing cleaning and refilling in
approximately 3 minutes.
Unpressurised tanks ensuring no size limitation on paint containers — increasing
production per hour.
Resin catalyst and pigment recycled to stop settlement
Used – Tenon 2000 Automatic Insulating Glass Production Line
SKU: N/ATE Series Automatic Insulating Glass Production Line model TE 2000 is
manufactured, assembled and inspected according to ISO9001 Quality Control
System. Most electric components are imported from Germany and Japan. The
stainless steel washing machine and the structure of I.G. line is made by
nonferrous special steel to ensure a long working life for the machine. Tenon
provides satisfied after sales service and spare parts in collaboration with IGE
Solutions in North America
Used Laminating Machine
SKU: N/AThe QX-LM series are professional glass laminating machines for use without an autoclave system. The
QX-LM series can laminate EVA (Ethylene Vinyl Acetate), DuPont™ SENTRYGLAS® (SG), and PVB
(Polyvinyl Butyral).
DJ252 (Restored) Sold
SKU: N/AThe 9-spindle DJ252 is suitable for processing straight-line glass with thicknesses ranging from 1/8” to 1 ¼”. The machine utilizes 5 wheels for bottom edging and 4 wheels for front and back 45° arris work.
Sold – DJM9L Used Machine
SKU: N/AThis DJM9L is a well taken care off used glass polisher and miter machine. The machine was produced back in 2014 and it is in fairly good conditions.
Sold – Refurbished DJM9L Polisher – Edger With Miter
SKU: N/AThis refurbished DJM9L is a fully refurbished glass edger. The machine has new motors, back/front tracks, transmission, chains, lights, control panel and more!The 9-spindle DJM9L is suitable for processing straight-line glass with thicknesses ranging from 3/16” to 7/8”. The machine utilizes 5 wheels for bottom edging and 4 wheels for front and back 45° arris work.
Sold – Sandblast
SKU: N/AUSED 2016 72″ high Glass Sandblasting Machine. The glass runs from left to right. The unit operates 4 blasting nozzles.
Used DJ252 Glass Edger & Miter Machine
SKU: N/AThis used DJ252 is in good working conditions.
ITGS1800 Used Sandblast – (Sold)
❑ Advance speed: 1m²=3-4min
❑ Maximum workable height: 1800mm (72”)
❑ Minimum workable glass dimension: 100X200mm
❑ Glass thickness range: 2-50mm
❑ Power: 5Kw
❑ Electrical requirements: 220V, 3Ph, 60Hz
❑ Required compressed air: 84-116 PSI (dry and clean air)
❑ Compressed air consumption: 2000 liters/min or 20hp
❑ Automatic sprayer guns: 2pc
❑ Manual sprayer guns: 1pc
❑ Aspirator delivery: 600m³/h
❑ Abrasive material: Aluminum Oxide
❑ Overall dimensions: 4100(L) X1450(W) X2250(H) mm
❑ Machine weight: 1700kg
Screw Type + Air Dryer + 1320 Gallons Air Tank – Sold
Screw Type – Companion Air Dryer + 5 Cu.Meters ( 1320 Gallons ) Air Tank
SKAC-75S Air Compressor 75HP(55KW),
480V, 3ph, 60Hz – 0.8-1.0 MPa, (120-150 psi) – 9M3/min (320 cf/min)
Total Run time: 2525 H 06 M (Almost New)
Loading Time: 757 H 23 M
***Ideal For Autoclave
Used – Bent & Flat Tempering Furnace
For sale- We have a 60″X120″ Bent & Flat tempering Machine. This machine was installed in Sept 2017. The machine can do both flat and bent tempering. Meaning, that if the glass runs in one direction you get flat tempered glass and in the opposite direction you can get bent glass for which you define the radius. It can temper thickness range from1/4″-3/4” glass and heat strengthen 3/16” glass.
Installation by Jordon Glass local technicians.
If any parts are needed, Jordon Glass will also be able to supply.
Used – Complete Cutting Line- (Sold)
Technical Features
Loader
Max. Glass sheet size 3800×2800
Min. Glass sheet size 1800×1200
Number of working stations 4
Glass thickness 2-22mm
Loading circle time L/R1<40sec; L/R1<55sec;
Cutting Machine
Max. Glass sheet size 3800×2800
Glass Thickness 2-22mm
Max. Beam moving speed 160m/min
Max. Beam cutting speed 120m/min
Max. Beam acceleration 1.25m/s2
Max. cutting head speed 120m/min
Max. Cutting head
acceleration 1.25m/s2
Break-out Table
Max. Glass sheet size 4000×3300
Glass thickness 2-22mm
No. of break-out bars 2+1
No. of blowing fan 2
Distance of blowhole <20mm
Used – Horizontal Drill – DZJ13 – (Sold)
The DZJ13can operate as a dual side driller or top-down only as
desired by the operator. When in dual mode, the bottom drill is activated first and rises using
an advanced damping control system that precisely engages the bottom side of the glass.
Bottom-up drilling depth is controlled via an operator adjusted limit switch. Once the bottom
drill has automatically released, the top drill starts and is manually lowered by the operator.
The DZJ13 offers 6 different operating speeds for varying diameters and glass thickness.
The unit comes with stop guides for repetitive drilling. The DZJ13 has a unique water
floatation system for maneuvering thin glass. This system can also be used for preparing the
drill table area and assuring there is no leftover debris that may scratch the glass. With a
table height of only 3’, the DZJ13 is ideal for loading and drilling glass of all shapes and
sizes.
Used – Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac – (Sold)
Used Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Features:
Automatic painting system
Fast, simple and clean. Fully automatic cleaning system
Maximum profitability and increased production but reduced labor costs
The quickest system cleaning and color changing in glass industry today
80% reduction on product wasted compared to manual spraying
Intuitive software and touch screen adaptable to any language.
Different sizes available: 180cm and 260cm width
Exclusive air filter system — no extraction needed allowing the machine to be placed
anywhere in your factory.
Automatic cleaning function.
The latest sensor control technology ensuring precision spraying every time.
No product wastage — the product is recirculate allowing cleaning and refilling in
approximately 3 minutes.
Unpressurised tanks ensuring no size limitation on paint containers — increasing
production per hour.
Resin catalyst and pigment recycled to stop settlement
Used – Tenon 2000 Automatic Insulating Glass Production Line
TE Series Automatic Insulating Glass Production Line model TE 2000 is
manufactured, assembled and inspected according to ISO9001 Quality Control
System. Most electric components are imported from Germany and Japan. The
stainless steel washing machine and the structure of I.G. line is made by
nonferrous special steel to ensure a long working life for the machine. Tenon
provides satisfied after sales service and spare parts in collaboration with IGE
Solutions in North America
Used Laminating Machine
The QX-LM series are professional glass laminating machines for use without an autoclave system. The
QX-LM series can laminate EVA (Ethylene Vinyl Acetate), DuPont™ SENTRYGLAS® (SG), and PVB
(Polyvinyl Butyral).
DJ252 (Restored) Sold
The 9-spindle DJ252 is suitable for processing straight-line glass with thicknesses ranging from 1/8” to 1 ¼”. The machine utilizes 5 wheels for bottom edging and 4 wheels for front and back 45° arris work.
Sold – DJM9L Used Machine
This DJM9L is a well taken care off used glass polisher and miter machine. The machine was produced back in 2014 and it is in fairly good conditions.
Lisec Cutting Table (sold)
Lisec – Laminated Glass Cutting Line
Sold – Refurbished DJM9L Polisher – Edger With Miter
This refurbished DJM9L is a fully refurbished glass edger. The machine has new motors, back/front tracks, transmission, chains, lights, control panel and more!The 9-spindle DJM9L is suitable for processing straight-line glass with thicknesses ranging from 3/16” to 7/8”. The machine utilizes 5 wheels for bottom edging and 4 wheels for front and back 45° arris work.
Sold – Sandblast
USED 2016 72″ high Glass Sandblasting Machine. The glass runs from left to right. The unit operates 4 blasting nozzles.
Used DJ252 Glass Edger & Miter Machine
This used DJ252 is in good working conditions.
ITGS1800 Used Sandblast – (Sold)
❑ Advance speed: 1m²=3-4min
❑ Maximum workable height: 1800mm (72”)
❑ Minimum workable glass dimension: 100X200mm
❑ Glass thickness range: 2-50mm
❑ Power: 5Kw
❑ Electrical requirements: 220V, 3Ph, 60Hz
❑ Required compressed air: 84-116 PSI (dry and clean air)
❑ Compressed air consumption: 2000 liters/min or 20hp
❑ Automatic sprayer guns: 2pc
❑ Manual sprayer guns: 1pc
❑ Aspirator delivery: 600m³/h
❑ Abrasive material: Aluminum Oxide
❑ Overall dimensions: 4100(L) X1450(W) X2250(H) mm
❑ Machine weight: 1700kg
Screw Type + Air Dryer + 1320 Gallons Air Tank – Sold
Screw Type – Companion Air Dryer + 5 Cu.Meters ( 1320 Gallons ) Air Tank
SKAC-75S Air Compressor 75HP(55KW),
480V, 3ph, 60Hz – 0.8-1.0 MPa, (120-150 psi) – 9M3/min (320 cf/min)
Total Run time: 2525 H 06 M (Almost New)
Loading Time: 757 H 23 M
***Ideal For Autoclave
Used – Bent & Flat Tempering Furnace
For sale- We have a 60″X120″ Bent & Flat tempering Machine. This machine was installed in Sept 2017. The machine can do both flat and bent tempering. Meaning, that if the glass runs in one direction you get flat tempered glass and in the opposite direction you can get bent glass for which you define the radius. It can temper thickness range from1/4″-3/4” glass and heat strengthen 3/16” glass.
Installation by Jordon Glass local technicians.
If any parts are needed, Jordon Glass will also be able to supply.
Used – Complete Cutting Line- (Sold)
Technical Features
Loader
Max. Glass sheet size 3800×2800
Min. Glass sheet size 1800×1200
Number of working stations 4
Glass thickness 2-22mm
Loading circle time L/R1<40sec; L/R1<55sec;
Cutting Machine
Max. Glass sheet size 3800×2800
Glass Thickness 2-22mm
Max. Beam moving speed 160m/min
Max. Beam cutting speed 120m/min
Max. Beam acceleration 1.25m/s2
Max. cutting head speed 120m/min
Max. Cutting head
acceleration 1.25m/s2
Break-out Table
Max. Glass sheet size 4000×3300
Glass thickness 2-22mm
No. of break-out bars 2+1
No. of blowing fan 2
Distance of blowhole <20mm
Used – Horizontal Drill – DZJ13 – (Sold)
The DZJ13can operate as a dual side driller or top-down only as
desired by the operator. When in dual mode, the bottom drill is activated first and rises using
an advanced damping control system that precisely engages the bottom side of the glass.
Bottom-up drilling depth is controlled via an operator adjusted limit switch. Once the bottom
drill has automatically released, the top drill starts and is manually lowered by the operator.
The DZJ13 offers 6 different operating speeds for varying diameters and glass thickness.
The unit comes with stop guides for repetitive drilling. The DZJ13 has a unique water
floatation system for maneuvering thin glass. This system can also be used for preparing the
drill table area and assuring there is no leftover debris that may scratch the glass. With a
table height of only 3’, the DZJ13 is ideal for loading and drilling glass of all shapes and
sizes.
Used – Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac – (Sold)
Used Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Features:
Automatic painting system
Fast, simple and clean. Fully automatic cleaning system
Maximum profitability and increased production but reduced labor costs
The quickest system cleaning and color changing in glass industry today
80% reduction on product wasted compared to manual spraying
Intuitive software and touch screen adaptable to any language.
Different sizes available: 180cm and 260cm width
Exclusive air filter system — no extraction needed allowing the machine to be placed
anywhere in your factory.
Automatic cleaning function.
The latest sensor control technology ensuring precision spraying every time.
No product wastage — the product is recirculate allowing cleaning and refilling in
approximately 3 minutes.
Unpressurised tanks ensuring no size limitation on paint containers — increasing
production per hour.
Resin catalyst and pigment recycled to stop settlement
Used – Tenon 2000 Automatic Insulating Glass Production Line
TE Series Automatic Insulating Glass Production Line model TE 2000 is
manufactured, assembled and inspected according to ISO9001 Quality Control
System. Most electric components are imported from Germany and Japan. The
stainless steel washing machine and the structure of I.G. line is made by
nonferrous special steel to ensure a long working life for the machine. Tenon
provides satisfied after sales service and spare parts in collaboration with IGE
Solutions in North America
Used Laminating Machine
The QX-LM series are professional glass laminating machines for use without an autoclave system. The
QX-LM series can laminate EVA (Ethylene Vinyl Acetate), DuPont™ SENTRYGLAS® (SG), and PVB
(Polyvinyl Butyral).
DJ252 (Restored) Sold
The 9-spindle DJ252 is suitable for processing straight-line glass with thicknesses ranging from 1/8” to 1 ¼”. The machine utilizes 5 wheels for bottom edging and 4 wheels for front and back 45° arris work.
Sold – DJM9L Used Machine
This DJM9L is a well taken care off used glass polisher and miter machine. The machine was produced back in 2014 and it is in fairly good conditions.
Lisec Cutting Table (sold)
Lisec – Laminated Glass Cutting Line
Sold – Refurbished DJM9L Polisher – Edger With Miter
This refurbished DJM9L is a fully refurbished glass edger. The machine has new motors, back/front tracks, transmission, chains, lights, control panel and more!The 9-spindle DJM9L is suitable for processing straight-line glass with thicknesses ranging from 3/16” to 7/8”. The machine utilizes 5 wheels for bottom edging and 4 wheels for front and back 45° arris work.
Sold – Sandblast
USED 2016 72″ high Glass Sandblasting Machine. The glass runs from left to right. The unit operates 4 blasting nozzles.
Used DJ252 Glass Edger & Miter Machine
This used DJ252 is in good working conditions.