
ITGS1800 Used Sandblast – Sold as is
❑ Advance speed: 1m²=3-4min
❑ Maximum workable height: 1800mm (72”)
❑ Minimum workable glass dimension: 100X200mm
❑ Glass thickness range: 2-50mm
❑ Power: 5Kw
❑ Electrical requirements: 220V, 3Ph, 60Hz
❑ Required compressed air: 84-116 PSI (dry and clean air)
❑ Compressed air consumption: 2000 liters/min or 20hp
❑ Automatic sprayer guns: 2pc
❑ Manual sprayer guns: 1pc
❑ Aspirator delivery: 600m³/h
❑ Abrasive material: Aluminum Oxide
❑ Overall dimensions: 4100(L) X1450(W) X2250(H) mm
❑ Machine weight: 1700kg

Screw Type + Air Dryer + 1320 Gallons Air Tank – $18,000.00
Screw Type – Companion Air Dryer + 5 Cu.Meters ( 1320 Gallons ) Air Tank
SKAC-75S Air Compressor 75HP(55KW),
480V, 3ph, 60Hz – 0.8-1.0 MPa, (120-150 psi) – 9M3/min (320 cf/min)
Total Run time: 2525 H 06 M (Almost New)
Loading Time: 757 H 23 M
***Ideal For Autoclave

Used – Complete Cutting Line
Technical Features
Loader
Max. Glass sheet size 3800×2800
Min. Glass sheet size 1800×1200
Number of working stations 4
Glass thickness 2-22mm
Loading circle time L/R1<40sec; L/R1<55sec;
Cutting Machine
Max. Glass sheet size 3800×2800
Glass Thickness 2-22mm
Max. Beam moving speed 160m/min
Max. Beam cutting speed 120m/min
Max. Beam acceleration 1.25m/s2
Max. cutting head speed 120m/min
Max. Cutting head
acceleration 1.25m/s2
Break-out Table
Max. Glass sheet size 4000×3300
Glass thickness 2-22mm
No. of break-out bars 2+1
No. of blowing fan 2
Distance of blowhole <20mm

Used – Horizontal Drill – DZJ13
The DZJ13can operate as a dual side driller or top-down only as
desired by the operator. When in dual mode, the bottom drill is activated first and rises using
an advanced damping control system that precisely engages the bottom side of the glass.
Bottom-up drilling depth is controlled via an operator adjusted limit switch. Once the bottom
drill has automatically released, the top drill starts and is manually lowered by the operator.
The DZJ13 offers 6 different operating speeds for varying diameters and glass thickness.
The unit comes with stop guides for repetitive drilling. The DZJ13 has a unique water
floatation system for maneuvering thin glass. This system can also be used for preparing the
drill table area and assuring there is no leftover debris that may scratch the glass. With a
table height of only 3’, the DZJ13 is ideal for loading and drilling glass of all shapes and
sizes.

Used – Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Used Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Features:
Automatic painting system
Fast, simple and clean. Fully automatic cleaning system
Maximum profitability and increased production but reduced labor costs
The quickest system cleaning and color changing in glass industry today
80% reduction on product wasted compared to manual spraying
Intuitive software and touch screen adaptable to any language.
Different sizes available: 180cm and 260cm width
Exclusive air filter system — no extraction needed allowing the machine to be placed
anywhere in your factory.
Automatic cleaning function.
The latest sensor control technology ensuring precision spraying every time.
No product wastage — the product is recirculate allowing cleaning and refilling in
approximately 3 minutes.
Unpressurised tanks ensuring no size limitation on paint containers — increasing
production per hour.
Resin catalyst and pigment recycled to stop settlement

Used – Tenon 2000 Automatic Insulating Glass Production Line
TE Series Automatic Insulating Glass Production Line model TE 2000 is
manufactured, assembled and inspected according to ISO9001 Quality Control
System. Most electric components are imported from Germany and Japan. The
stainless steel washing machine and the structure of I.G. line is made by
nonferrous special steel to ensure a long working life for the machine. Tenon
provides satisfied after sales service and spare parts in collaboration with IGE
Solutions in North America

Used Laminating Machine
The QX-LM series are professional glass laminating machines for use without an autoclave system. The
QX-LM series can laminate EVA (Ethylene Vinyl Acetate), DuPont™ SENTRYGLAS® (SG), and PVB
(Polyvinyl Butyral).


20 Watts, 24 in long, Fluorescent tube only, industrial UV Light.
It fits any standard 24″ lamp holder.




Angle Motor
Angle Changing Motor for DJ252 and DJM9L Miter System – 220v / 0.37kW / 1.94A / 60Hz


Automatic Cutting Table Series CNC- Multi-Function
The CY-CNC -4228 Multi-Function Series is a computer controlled glass cutting system with an optimization program for scoring and glass break out of 4000x2800mn (157”X110”) maximum sized glass sheeting for 3-19mm thick glass.


Blue Water Nozzle- 1/4 in
Round interlocking flexible coolant (blue nozzles) for Water Distribution – 1/4″ male thread diameter

Blue Water Nozzle- 5/8 in
Round interlocking flexible coolant (blue nozzle) for Water Distribution – 5/8″ male thread diameter

BO 665-0 for Glass to Glass
Characteristics:
·Crystal clear
·Low-viscosity = thin-bodied
·Excellent capillary action
·Relatively hard and brittle
Suitable bonding materials:
·Glass to glass
BO 665-0 for glass to glass, 100gr/100cc,

ITGS1800 Used Sandblast – Sold as is
SKU: N/A❑ Advance speed: 1m²=3-4min
❑ Maximum workable height: 1800mm (72”)
❑ Minimum workable glass dimension: 100X200mm
❑ Glass thickness range: 2-50mm
❑ Power: 5Kw
❑ Electrical requirements: 220V, 3Ph, 60Hz
❑ Required compressed air: 84-116 PSI (dry and clean air)
❑ Compressed air consumption: 2000 liters/min or 20hp
❑ Automatic sprayer guns: 2pc
❑ Manual sprayer guns: 1pc
❑ Aspirator delivery: 600m³/h
❑ Abrasive material: Aluminum Oxide
❑ Overall dimensions: 4100(L) X1450(W) X2250(H) mm
❑ Machine weight: 1700kg

Screw Type + Air Dryer + 1320 Gallons Air Tank – $18,000.00
SKU: N/AScrew Type – Companion Air Dryer + 5 Cu.Meters ( 1320 Gallons ) Air Tank
SKAC-75S Air Compressor 75HP(55KW),
480V, 3ph, 60Hz – 0.8-1.0 MPa, (120-150 psi) – 9M3/min (320 cf/min)
Total Run time: 2525 H 06 M (Almost New)
Loading Time: 757 H 23 M
***Ideal For Autoclave

Used – Complete Cutting Line
SKU: N/ATechnical Features
Loader
Max. Glass sheet size 3800×2800
Min. Glass sheet size 1800×1200
Number of working stations 4
Glass thickness 2-22mm
Loading circle time L/R1<40sec; L/R1<55sec;
Cutting Machine
Max. Glass sheet size 3800×2800
Glass Thickness 2-22mm
Max. Beam moving speed 160m/min
Max. Beam cutting speed 120m/min
Max. Beam acceleration 1.25m/s2
Max. cutting head speed 120m/min
Max. Cutting head
acceleration 1.25m/s2
Break-out Table
Max. Glass sheet size 4000×3300
Glass thickness 2-22mm
No. of break-out bars 2+1
No. of blowing fan 2
Distance of blowhole <20mm

Used – Horizontal Drill – DZJ13
SKU: N/AThe DZJ13can operate as a dual side driller or top-down only as
desired by the operator. When in dual mode, the bottom drill is activated first and rises using
an advanced damping control system that precisely engages the bottom side of the glass.
Bottom-up drilling depth is controlled via an operator adjusted limit switch. Once the bottom
drill has automatically released, the top drill starts and is manually lowered by the operator.
The DZJ13 offers 6 different operating speeds for varying diameters and glass thickness.
The unit comes with stop guides for repetitive drilling. The DZJ13 has a unique water
floatation system for maneuvering thin glass. This system can also be used for preparing the
drill table area and assuring there is no leftover debris that may scratch the glass. With a
table height of only 3’, the DZJ13 is ideal for loading and drilling glass of all shapes and
sizes.

Used – Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
SKU: N/AUsed Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Features:
Automatic painting system
Fast, simple and clean. Fully automatic cleaning system
Maximum profitability and increased production but reduced labor costs
The quickest system cleaning and color changing in glass industry today
80% reduction on product wasted compared to manual spraying
Intuitive software and touch screen adaptable to any language.
Different sizes available: 180cm and 260cm width
Exclusive air filter system — no extraction needed allowing the machine to be placed
anywhere in your factory.
Automatic cleaning function.
The latest sensor control technology ensuring precision spraying every time.
No product wastage — the product is recirculate allowing cleaning and refilling in
approximately 3 minutes.
Unpressurised tanks ensuring no size limitation on paint containers — increasing
production per hour.
Resin catalyst and pigment recycled to stop settlement

Used – Tenon 2000 Automatic Insulating Glass Production Line
SKU: N/ATE Series Automatic Insulating Glass Production Line model TE 2000 is
manufactured, assembled and inspected according to ISO9001 Quality Control
System. Most electric components are imported from Germany and Japan. The
stainless steel washing machine and the structure of I.G. line is made by
nonferrous special steel to ensure a long working life for the machine. Tenon
provides satisfied after sales service and spare parts in collaboration with IGE
Solutions in North America

Used Laminating Machine
SKU: N/AThe QX-LM series are professional glass laminating machines for use without an autoclave system. The
QX-LM series can laminate EVA (Ethylene Vinyl Acetate), DuPont™ SENTRYGLAS® (SG), and PVB
(Polyvinyl Butyral).

240 Resin Cup Wheel – 130 mm
SKU: N/ABore: 12mm / 22mm / 50mm
Diam: 130mm
Width: 10mm Height: 38mm

20 Watts, 24 in long, Fluorescent tube only, industrial UV Light.
SKU: N/AIt fits any standard 24″ lamp holder.

Adjusting Knob 10ID
SKU: 300500004knob with indicator for Manual motor adjustment 10mm ID

Adjusting Knob 12ID
SKU: 300500005knob with indicator for Manual motor adjustment 12mm ID

Angle Motor
SKU: 310111001Angle Changing Motor for DJ252 and DJM9L Miter System – 220v / 0.37kW / 1.94A / 60Hz

Automatic Cutting Table Series CNC- Multi-Function
SKU: N/AThe CY-CNC -4228 Multi-Function Series is a computer controlled glass cutting system with an optimization program for scoring and glass break out of 4000x2800mn (157”X110”) maximum sized glass sheeting for 3-19mm thick glass.

BD Cup Polishing Wheel Arris
SKU: N/ABore: 12mm
Diam: 130mm Width: 22mm Height: 36mm |

Blue Water Nozzle- 1/4 in
SKU: 300100002Round interlocking flexible coolant (blue nozzles) for Water Distribution – 1/4″ male thread diameter

Blue Water Nozzle- 5/8 in
SKU: 300100003Round interlocking flexible coolant (blue nozzle) for Water Distribution – 5/8″ male thread diameter

BO 665-0 for Glass to Glass
SKU: N/ACharacteristics:
·Crystal clear
·Low-viscosity = thin-bodied
·Excellent capillary action
·Relatively hard and brittle
Suitable bonding materials:
·Glass to glass
BO 665-0 for glass to glass, 100gr/100cc,

ITGS1800 Used Sandblast – Sold as is
❑ Advance speed: 1m²=3-4min
❑ Maximum workable height: 1800mm (72”)
❑ Minimum workable glass dimension: 100X200mm
❑ Glass thickness range: 2-50mm
❑ Power: 5Kw
❑ Electrical requirements: 220V, 3Ph, 60Hz
❑ Required compressed air: 84-116 PSI (dry and clean air)
❑ Compressed air consumption: 2000 liters/min or 20hp
❑ Automatic sprayer guns: 2pc
❑ Manual sprayer guns: 1pc
❑ Aspirator delivery: 600m³/h
❑ Abrasive material: Aluminum Oxide
❑ Overall dimensions: 4100(L) X1450(W) X2250(H) mm
❑ Machine weight: 1700kg

Screw Type + Air Dryer + 1320 Gallons Air Tank – $18,000.00
Screw Type – Companion Air Dryer + 5 Cu.Meters ( 1320 Gallons ) Air Tank
SKAC-75S Air Compressor 75HP(55KW),
480V, 3ph, 60Hz – 0.8-1.0 MPa, (120-150 psi) – 9M3/min (320 cf/min)
Total Run time: 2525 H 06 M (Almost New)
Loading Time: 757 H 23 M
***Ideal For Autoclave

Used – Complete Cutting Line
Technical Features
Loader
Max. Glass sheet size 3800×2800
Min. Glass sheet size 1800×1200
Number of working stations 4
Glass thickness 2-22mm
Loading circle time L/R1<40sec; L/R1<55sec;
Cutting Machine
Max. Glass sheet size 3800×2800
Glass Thickness 2-22mm
Max. Beam moving speed 160m/min
Max. Beam cutting speed 120m/min
Max. Beam acceleration 1.25m/s2
Max. cutting head speed 120m/min
Max. Cutting head
acceleration 1.25m/s2
Break-out Table
Max. Glass sheet size 4000×3300
Glass thickness 2-22mm
No. of break-out bars 2+1
No. of blowing fan 2
Distance of blowhole <20mm

Used – Horizontal Drill – DZJ13
The DZJ13can operate as a dual side driller or top-down only as
desired by the operator. When in dual mode, the bottom drill is activated first and rises using
an advanced damping control system that precisely engages the bottom side of the glass.
Bottom-up drilling depth is controlled via an operator adjusted limit switch. Once the bottom
drill has automatically released, the top drill starts and is manually lowered by the operator.
The DZJ13 offers 6 different operating speeds for varying diameters and glass thickness.
The unit comes with stop guides for repetitive drilling. The DZJ13 has a unique water
floatation system for maneuvering thin glass. This system can also be used for preparing the
drill table area and assuring there is no leftover debris that may scratch the glass. With a
table height of only 3’, the DZJ13 is ideal for loading and drilling glass of all shapes and
sizes.

Used – Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Used Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Features:
Automatic painting system
Fast, simple and clean. Fully automatic cleaning system
Maximum profitability and increased production but reduced labor costs
The quickest system cleaning and color changing in glass industry today
80% reduction on product wasted compared to manual spraying
Intuitive software and touch screen adaptable to any language.
Different sizes available: 180cm and 260cm width
Exclusive air filter system — no extraction needed allowing the machine to be placed
anywhere in your factory.
Automatic cleaning function.
The latest sensor control technology ensuring precision spraying every time.
No product wastage — the product is recirculate allowing cleaning and refilling in
approximately 3 minutes.
Unpressurised tanks ensuring no size limitation on paint containers — increasing
production per hour.
Resin catalyst and pigment recycled to stop settlement

Used – Tenon 2000 Automatic Insulating Glass Production Line
TE Series Automatic Insulating Glass Production Line model TE 2000 is
manufactured, assembled and inspected according to ISO9001 Quality Control
System. Most electric components are imported from Germany and Japan. The
stainless steel washing machine and the structure of I.G. line is made by
nonferrous special steel to ensure a long working life for the machine. Tenon
provides satisfied after sales service and spare parts in collaboration with IGE
Solutions in North America

Used Laminating Machine
The QX-LM series are professional glass laminating machines for use without an autoclave system. The
QX-LM series can laminate EVA (Ethylene Vinyl Acetate), DuPont™ SENTRYGLAS® (SG), and PVB
(Polyvinyl Butyral).


20 Watts, 24 in long, Fluorescent tube only, industrial UV Light.
It fits any standard 24″ lamp holder.






Automatic Cutting Table Series CNC- Multi-Function
The CY-CNC -4228 Multi-Function Series is a computer controlled glass cutting system with an optimization program for scoring and glass break out of 4000x2800mn (157”X110”) maximum sized glass sheeting for 3-19mm thick glass.


Blue Water Nozzle- 1/4 in
Round interlocking flexible coolant (blue nozzles) for Water Distribution – 1/4″ male thread diameter

Blue Water Nozzle- 5/8 in
Round interlocking flexible coolant (blue nozzle) for Water Distribution – 5/8″ male thread diameter

BO 665-0 for Glass to Glass
Characteristics:
·Crystal clear
·Low-viscosity = thin-bodied
·Excellent capillary action
·Relatively hard and brittle
Suitable bonding materials:
·Glass to glass
BO 665-0 for glass to glass, 100gr/100cc,

ITGS1800 Used Sandblast – Sold as is
❑ Advance speed: 1m²=3-4min
❑ Maximum workable height: 1800mm (72”)
❑ Minimum workable glass dimension: 100X200mm
❑ Glass thickness range: 2-50mm
❑ Power: 5Kw
❑ Electrical requirements: 220V, 3Ph, 60Hz
❑ Required compressed air: 84-116 PSI (dry and clean air)
❑ Compressed air consumption: 2000 liters/min or 20hp
❑ Automatic sprayer guns: 2pc
❑ Manual sprayer guns: 1pc
❑ Aspirator delivery: 600m³/h
❑ Abrasive material: Aluminum Oxide
❑ Overall dimensions: 4100(L) X1450(W) X2250(H) mm
❑ Machine weight: 1700kg

Screw Type + Air Dryer + 1320 Gallons Air Tank – $18,000.00
Screw Type – Companion Air Dryer + 5 Cu.Meters ( 1320 Gallons ) Air Tank
SKAC-75S Air Compressor 75HP(55KW),
480V, 3ph, 60Hz – 0.8-1.0 MPa, (120-150 psi) – 9M3/min (320 cf/min)
Total Run time: 2525 H 06 M (Almost New)
Loading Time: 757 H 23 M
***Ideal For Autoclave

Used – Complete Cutting Line
Technical Features
Loader
Max. Glass sheet size 3800×2800
Min. Glass sheet size 1800×1200
Number of working stations 4
Glass thickness 2-22mm
Loading circle time L/R1<40sec; L/R1<55sec;
Cutting Machine
Max. Glass sheet size 3800×2800
Glass Thickness 2-22mm
Max. Beam moving speed 160m/min
Max. Beam cutting speed 120m/min
Max. Beam acceleration 1.25m/s2
Max. cutting head speed 120m/min
Max. Cutting head
acceleration 1.25m/s2
Break-out Table
Max. Glass sheet size 4000×3300
Glass thickness 2-22mm
No. of break-out bars 2+1
No. of blowing fan 2
Distance of blowhole <20mm

Used – Horizontal Drill – DZJ13
The DZJ13can operate as a dual side driller or top-down only as
desired by the operator. When in dual mode, the bottom drill is activated first and rises using
an advanced damping control system that precisely engages the bottom side of the glass.
Bottom-up drilling depth is controlled via an operator adjusted limit switch. Once the bottom
drill has automatically released, the top drill starts and is manually lowered by the operator.
The DZJ13 offers 6 different operating speeds for varying diameters and glass thickness.
The unit comes with stop guides for repetitive drilling. The DZJ13 has a unique water
floatation system for maneuvering thin glass. This system can also be used for preparing the
drill table area and assuring there is no leftover debris that may scratch the glass. With a
table height of only 3’, the DZJ13 is ideal for loading and drilling glass of all shapes and
sizes.

Used – Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Used Painting Line Picasso 260 + Dryer D-260 IGE – Automatic Spray Coating Mac
Features:
Automatic painting system
Fast, simple and clean. Fully automatic cleaning system
Maximum profitability and increased production but reduced labor costs
The quickest system cleaning and color changing in glass industry today
80% reduction on product wasted compared to manual spraying
Intuitive software and touch screen adaptable to any language.
Different sizes available: 180cm and 260cm width
Exclusive air filter system — no extraction needed allowing the machine to be placed
anywhere in your factory.
Automatic cleaning function.
The latest sensor control technology ensuring precision spraying every time.
No product wastage — the product is recirculate allowing cleaning and refilling in
approximately 3 minutes.
Unpressurised tanks ensuring no size limitation on paint containers — increasing
production per hour.
Resin catalyst and pigment recycled to stop settlement

Used – Tenon 2000 Automatic Insulating Glass Production Line
TE Series Automatic Insulating Glass Production Line model TE 2000 is
manufactured, assembled and inspected according to ISO9001 Quality Control
System. Most electric components are imported from Germany and Japan. The
stainless steel washing machine and the structure of I.G. line is made by
nonferrous special steel to ensure a long working life for the machine. Tenon
provides satisfied after sales service and spare parts in collaboration with IGE
Solutions in North America

Used Laminating Machine
The QX-LM series are professional glass laminating machines for use without an autoclave system. The
QX-LM series can laminate EVA (Ethylene Vinyl Acetate), DuPont™ SENTRYGLAS® (SG), and PVB
(Polyvinyl Butyral).


20 Watts, 24 in long, Fluorescent tube only, industrial UV Light.
It fits any standard 24″ lamp holder.






Automatic Cutting Table Series CNC- Multi-Function
The CY-CNC -4228 Multi-Function Series is a computer controlled glass cutting system with an optimization program for scoring and glass break out of 4000x2800mn (157”X110”) maximum sized glass sheeting for 3-19mm thick glass.


Blue Water Nozzle- 1/4 in
Round interlocking flexible coolant (blue nozzles) for Water Distribution – 1/4″ male thread diameter

Blue Water Nozzle- 5/8 in
Round interlocking flexible coolant (blue nozzle) for Water Distribution – 5/8″ male thread diameter

BO 665-0 for Glass to Glass
Characteristics:
·Crystal clear
·Low-viscosity = thin-bodied
·Excellent capillary action
·Relatively hard and brittle
Suitable bonding materials:
·Glass to glass
BO 665-0 for glass to glass, 100gr/100cc,