The post CVDM2030 – Vertical Drilling and Milling Machine appeared first on Jordon Glass Machinery.

The glass is held by a clamp support system that firmly holds the piece during the milling process. The FV1000 comes with user-friendly software that allows the loading of a series of different working programs. The software includes a library of built-in notches that can be modified and stored for operator selection. Other loading procedures include the use of ISO programming or importing DXF Files loaded by USB drive or network.

The FV1000 is equipped for REMOTE FACTORY SUPPORT.

Milling Drilling Tool

The post FV1000 – Drilling/Milling Machine appeared first on Jordon Glass Machinery.

Waterjet cutting systems are one of the more economical and versatile methods of cutting any material. Soft material like wood siding to hard material like structural steel can be cut with a waterjet system. Waterjet cutting is clean and accurate. Water jet systems have the advantage of not producing a heat affected zone as other methods of cutting do. The operation and maintenance of a waterjet system is simple enough to train on the job.

A Waterjet cutting system consists of 3 major units; a hydraulic pumping system, a water pressure system, a cutting head system. Potable water of at least 40psi is introduced through a filter bank to a high-pressure cylinder where the water is compressed by a plunger operated by the hydraulic pumping system. The pressurized water is then delivered through high pressure components through a tiny orifice, then through a nozzle, and then directed to the material that will be cut by means of a numeric control system.  A pump’s horse power is linked to the volume of water that it displaces and has available to cut the desired material. Final cutting pressure is not necessarily linked to the horse power of the pump. A 10HP pump and a 30HP pump, for example, can generate the same amount of cutting PSI (60,000psi) with the appropriate cutting orifice. A pump with higher horse power, however, is able to deliver the same level of high pressure, but with a greater volume of water.

ENVIRONMENTAL REQUIREMENTS:

• Room temperature range 35-120ºF
• Relative Humidity ≤ 95% @120ºF
• Drainage capacity adequate for intensifier pump system, typically 5-10 GPM
• Separate Clean and ventilated room for repairs

 SYSTEM REQUIREMENTS:

• Reciprocating controlled hydraulic pump system to deliver up to 3000psi (207Bar), optimum pressure 2750psi (190Bar), hydraulic oil with a maximum temperature below 110ºF (optimum operating temperature 105ºF; 55 strokes/min).
• Potable water (PH 6-8) supplied at 40-85 psig through a filter bank system removing particles above 0.5 micron absolute. Contaminated water will severely reduce longevity of several waterjet system components. High pressure fittings, valves, and tubing to deliver 60kpsi water to a waterjet cutting head.

The post Waterjet Bridge or Cantilever appeared first on Jordon Glass Machinery.

The post DZJ13 – Glass Drilling Machine appeared first on Jordon Glass Machinery.

The CY-CNC -4228 Multi-Function Series is a computer-controlled glass cutting system with an optimization program for scoring and glass break out of 4000x2800mn (157”X110”) maximum sized glass sheeting for 3-19mm thick glass. The CY CNC glass cutting machine is the optimal solution for cutting glass in various shapes and sizes. It operates a multi-axis cutting mechanism that automatically adjusts the pressure exerted by the cutting wheel on the glass surface based on the geometry of the cutting path. The cutting head makes use of BOHLE Silberschnitt cutting wheels (Germany) for superior cutting results and long life. The lubricating system for the cutting head is also regulated according to cutting speed and geometry thus eliminating waste, increasing efficiency, and resulting in a perfect score every time. The table base is fabricated using heavy wall tubular steel. The tabletop is a high-density composite material fitted with an abrasive resistant needle punched carpet ensuring complete flatness. The table edges have replaceable wear resistant wooden trim to protect all sides of the carpet from abrasive corner and edge wear. The table is equipped with a heavy-duty air flotation system and/or two breaking bars or transfer belts if to be used on a cutting line. The sliding guide rails, and gearing racks (made in Austria) are housed on the machine base and driven by Yaskawa frequency converters controlled by a TECNOS CAM bus.

The post Automatic Cutting Table Series CNC- Multi-Function appeared first on Jordon Glass Machinery.

The post JGBT3520 Glass breaking table appeared first on Jordon Glass Machinery.

The post CY4228 Breaking Table appeared first on Jordon Glass Machinery.